HAMOKI B10, Instruction Manual, Page: 10 / 19

10
Wherever possible, the mixer should be transported to the installation position in
the packaging provided to avoid any damage. Do not use a sharp knife to open
the box to prevent damaging the machine. On first inspection, check for any
possible shipping damages. If any damage has been found, save the packaging
material and contact us.
Caution: The mixer is a heavy object and must be correctly handled and lifted to
avoid any and all personal injuries.
With the machine in the vicinity of its final position remove from the transportation
pallet. The machine is affixed to the pallet by four retaining bolts through the
pallet into the threaded feet of the base. Care must be taken during this operation
to ensure:
▪
All required safety measures are taken to ensure correct lifting and handling to
avoid risk of injury, which may be through dropping, falling or tilting.
▪
No damage is made to the machine which could impair the normal operation.
The mixer is not suitable for outdoor installation and must not be installed where a
water jet could be used for cleaning. The mixer must only be operated by trained
staff and must be installed in an area where the use and maintenance is
restricted to trained personnel.
▪
Ensure that the mixer is at a height with the bowl handles approximately
between the knuckle and elbow height. This will reduce the need to bend at the
waist.
▪
Select a suitable flat level surface that can support the weight of the mixer and
bowl contents when full. It is recommended the mixer is secured in position.
▪
Ensure the table, stand or work surface is firmly fixed to the floor. The appliance
must be restrained to prevent any movement during use.
▪
Ensure that there is sufficient space around the mixer to allow for safe
operation. Servicing may also become an issue if there is a greatly reduced
clearance, so ensure that the service accesses to the top, side and rear of the
mixer are clear.