HAMOKI B10, Instruction Manual, Page: 18 / 19

18
PROBLEM POSSIBLE CAUSES SOLUTION
The mixing shaft
does not rotate
after switch on
Electric connectors are
loose
Check the electric
circuit, tighten those
loose connectors
Oil leakage Oil seals are worn out Replace the oil seals
The raising handle
is too tight
Guide ways are corroded
The lead screw, bevel gear
and hand wheel shaft etc. is
dry
Clean and oil the guide
ways
Oil them
Temperature rise
of motor is too
high, below speed
Lack of voltage
Overload
The working speed selected is
too high or agitator is not
suitable
Check the supply voltage
Less load
Select a suitable speed
and agitator
TROUBLESHOOTING