background image

93

Special Advanced Features        

    Hammond XK-2 Quick Features Guide

     Select

 EDIT PARAMETER

{1  MASTER TUNE

       440Hz

Master Tune

This Advanced Feature allows you to change the overall tuning pitch of the entire instrument.  You can select from “430Hz”

to “450Hz.”  The default setting is “440Hz.”

NOTE:  

The term “Hz” is an abbreviation for Hertz

Hertz, and refers to the frequency of a pitch measured in cycles per second. 

The note reference commonly used is “A440,” meaning that a note consisting of 440 Hertz will be the pitch “A.”  This is the

international standard used to tune most musical instruments.

TRY THIS:

1.

Touch the EDIT Select Touch Button.  The red LED will light, and the Information Center Display

should look like this:

2.

Touch the SYSTEM Select Touch Button once.  The Information Center Display should look like this:

3.

To change the pitch of the XK-2, do the following:

Use the VALUE "

>

" Select Touch Button to raise the pitch.

Use the VALUE "

?

" Select Touch Button to lower the pitch.

default setting is "440Hz.”

This is a System Parameter, and this data CAN NOT be stored to a Preset.  To see a total listing of all System Parameters, see the System

Parameter List.

NOTE:  

You can exit by touching the EDIT Select Touch Button.

Summary of Contents for XK-2





















































































































Reviews: