74
MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{30 MIDI21
Rx TRANSPOSE 0
MIDI Receive Transpose ON / OFF
This Advanced Feature allows you to transpose incoming MIDI Note data. You can transpose the data up or down 6 half-
steps (-6 ~ +6). The default setting is “0".
TRY THIS:
1.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2.
Touch the SYSTEM Select Touch Button once. The Information Center Display should look like this:
3.
Touch the PAGE “
<
” Select Touch Button twenty times. The Information Center Display should look
like this:
4.
Now select the option you wish by doing the following:
Use the VALUE "
>
" Select Touch Button to raise the pitch by semitones.
Use the VALUE "
?
" Select Touch Button to lower the pitch by semitones.
NOTE:
This setting DOES NOT affect the pitch of the XK-2 Drawbar or Percussion tones. For information on
how to transpose the XK-2 itself, see page 95.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE:
You can exit by touching the EDIT Select Touch Button.
