Hammond XK-1c, Owner'S Manual

Page: 95 / 140

95
Setting the Parameters
REVERB
In this mode, you set the Reverb eff ect.
To locate this mode:
❶
DEPTH
Th is sets the depth (volume) of the Reverb Eff ect.
Th e setting range is 0 to 127.
❷ TYPE
Th is sets the types of Reverb eff ect.
Room 1: Small room
Room 2: Large room
Live: Ambient room
Hall 1: Large Hall
Hall 2: Small Hall
Church: Church
Plate: Iron-plate Reverb
Spring: Spring Reverb
Delay: Delay
PanDly: Panning Delay
RevDly: Delay
❸ REVERB TIME
When the Type (#2) is set at Room 1 to Spring, Th e decay of the Reverb is attenuated.
Th e setting range is 0 to 127. Th e decay becomes greater as the value is increased.
❹ DELAY TIME
When the Type (#2) is set at Delay, PanDly, RevDly, this parameter sets the delay time.
Th
e setting range is 4.7 to 2000ms. Th e delay becomes longer as the number value is
increased.
NOTE: You can set the delay time with the foot switch. (P. 72 #2)
❺
DELAY FEEDBACK
When the Type (#2) is at Delay, PanDly, RevDly, it sets the amount of Feedback (How
many times the sound repeats.)
Th
e setting range is 0 to 96%. Th e repetition becomes greater as the value is increased.
NOTE: Type (#2) is a macro-parameter. When you change the type, each reverb parameter (#3 to
#5) is automatically set to the recommend value.
❻ LESLIE ON REVERB
Th is sets the routing of the Reverb eff ect.
OFF: Leslie to Reverb
ON: Reverb to Leslie
or, keep pressing the [REVERB ON] button for a few seconds.
See “Function mode” (P. 62) for operation details.
NOTE: All the parameters in these modes
are Patch Parameters. They are re-
corded into the Patch.
LESLIE ON REVERB
In the past when there are no electronic Les-
lie eff ect, the sound sent to the Leslie speaker
with reverb eff ect. It made a sound which ro-
tated reverb too.
The Leslie On Reverb simulates that.
❶ ❷
❸ ❹ ❺
❻