Hammond XK-1c, Owner'S Manual

Page: 84 / 140

*#1 :-%
Owner’s Manual
84
PIPE
In this mode, you edit the characteristics of each pipe.
To locate this mode:
See “Function mode” (P. 62) for operation details.
❶
PIPE NUMBER
Select the PIPE which you desire to edit by [
S
],[
T
] buttons.
Th ere are 20 pipes which according to Drawbars from “Bourdon 16´” to “Principal
Chorus 4´ + Mixture IV” (P. 44).
❷ VOLUME (Pi)
Adjusts the volume of the pipe. Th e setting range is 0 to 127.
❸ DETUNE (Pi)
Detunes the pitch of pipe from accurate pitch by cent (⁄ of semitones).
Th
e setting range is -50 - 0 - +50.
❹
CHIFF (Pi)
Sets the “Chiff ” noise of beginning of notes.
OFF: No sounds the chiff noise.
SOFT: Sounds the chiff noise slightly.
MID: Sounds the chiff noise medium.
LOUD: Sounds the chiff noise maximum.
NOTE: Some pipes does not aff ect the chiff parameter i.e. “Hautbois 8´”.
❺ CUT OFF FREQUENCY (Pi)
Adjusts the tone quality of the pipe.
Th
e setting range is -64 to 0. At 0, all of pipe sounds are heard. Th e sound becomes
mellower by the decreases value.
❻ PAN - DIRECTION (Pi)
Adjusts the basic direction of the pipe.
Th
e setting range is L64 - C - R63 (Left - Center - Right).
DETUNE
The beating is heard by sounding detuned pitch
on sounding accurate pitch.
Each pipe can be detuned for comfortable beating.
But it may out of tune by too much detune.
Generally, they are eff ective that set at “-” side for
lower octave pipes, set at “+” side for upper octave
pipes.
CHIFF
The slight puff of air that is heard from certain
pipes upon playing.
❶ ❷ ❸ ❹ ❺ ❻ ❼
... omitted ...