Hammond XK-1c, Owner'S Manual

Page: 63 / 140

63
Using the Control Panel
AMOUNT VOLUME
RECORD ENTER
VALUE
EXIT
MENU /
5
2 3 1
6 4
7 8 MANUAL
SHORT CUT TO FUNCTION MODE
Each button on the top panel has a built in shortcut-making programming and edit-
ing easier.
Pressing and holding any of the buttons on the top panel automatically jumps the
display to the related function menu item.
EXAMPLE OF OPERATION:
LOCATE THE PERCUSSION FUNCTION MODE
If you wish to edit the percussion settings, press and hold ei-
ther of the [ON], [THIRD], [FAST], or [SOFT] buttons, and
the display will immediately jump to the percussion function
mode. Th
is is called “SHORT CUT”.
In the next chapter, you will see which button is used for a
particular “SHORT CUT”.
NOTE: Changing the length of time until display jump when button
is held. (P. 74)
REGISTER THE PAGES YOU FREQUENTLY USE
You can assign frequently-used function page to the [CONTROL] button for
immediate access.
EXAMPLE OF OPERATION:
REGISTER THE “DRAWBAR - PEDAL” PAGE
Display the page you want to register using the MENU etc. Here,
as an example, let’s display the “Drawbar - Pedal” page.
While holding down the [RECORD] button press the [CON-
TROL] button.
You will be able to immediately access the desired page by pressing
the [CONTROL] button.
1
2
Press and hold
Press and hold
Press with...