*#1 2-2:-
Owner’s Manual
6
ADVANCED OPERATION
REBOUND TIME
MIDI CHANNEL
LOAD DEFAULT VALUES
If you play the pedals very fast with a staccato action or if
the leafsprings used on the pedals change the characteristic
in time (which is a normal situation in heavy use) it may
happen that the pedal key bounces a little on release. It may
have the effect that you will hear the tone twice.
On previous models you could only solve this by increasing
the tension on the leafsprings. With this model you can
also avoid this effect very quickly by adjusting the rebound
time setting.
To change the value, turn on the power while pressing the
highest B and the key corresponding to its value. (See the
left figure.)
Then, the LED on the left of the Expression Pedal blinks
slowly the number of times indicating the value.
The setting range is 1 to 16 times (x) 1.22 milliseconds. 4
times (x) 1.22 milliseconds is the default.
Note: Too long rebound time causes delay in the sound.
You can change the MIDI channel of the Pedal Keyboard for
special purposes.
To change the MIDI channel, turn on the power while press-
ing the highest C and the key corresponding to its value.
(See the left figure.)
Then, the LED on the left of the Expression Pedal blinks fast
the number of times indicating the value.
The setting range is Channel 1 to 16. Channel 3 is default.
To reset the PK-25PXK to the initial status, turn on the power
while pressing the highest A#, B and C (See the left figure).
Then, the LED on the left side of the Expression Pedal blinks
three times, indicating the reset procedure.