56
!
!
$
"
"
#
#
!
"
Saw-Spindle Moulder
B3 / B3 e-classic
9.4 Spindle moulder fence
Fig. 9-3: Spindle moulder fence
The spindle moulder fence is appropriate for tooling with
a diameter of up to 220 mm.
1.
Once the clamping screws have been loosened, the
spindle moulder fence can be coarsely adjusted.
(1)
2.
To remove the spindle moulder fence, unscrew both
clamping screws.
(1)
3.
To adjust both fence boards to the tooling used, open
both clamping screws, move the boards and tighten
again.
(2)
4.
Using the thumb screw, adjust the depth of cut and
respectively the fence boards to the cutting circle.
(2)
/
(3)
!
Clamping screws
#
Thumb screw
"
Clamping screws
$
Scale
9.4.2 Multi-adjustment system for the moulder fence (Option)
The fine adjustment for the outer tool diameter is used for
the fine adjustment of the complete shaper fence in rela-
tion to the outer tool diameter. It has an automatic repeat
function, i.e. the shaper fence retains all of its settings
when removed and reinstalled.
1.
When setting the fence on the machine table, you
position the guide piece so the bolts fit into the holes
in the machine table.
!
Bolts
"
Guide piece
#
Holes
Fig. 9-4: Fine adjustment for outer tool diameter
9.4.1 Spindle moulder fence „220“ (Standard)
Making adjustments and preparations
