21
Saw-Spindle Moulder
B3 / B3 e-classic
Spindle moulder unit
Table opening (Ø)
190 mm
Spindle moulder-Ø max.
Spindle moulder guard
220 mm
Slot guard
275 mm
Spindle-Ø Standard
30 mm
Spindle shaft quick change system Option 1*)
32 / 35 / 50 mm
Spindle shaft quick change system Option 2*)
1 ¼ inch
constant rotation
3000/6000/8000/10000 min-1
Speed High velocity spindle
15000 min-1
Spindle height above table (Usable height)
100mm
Tilting of spindle *)
90° to 45°
* not available with e-classic
Only use spindle moulder tools,
• which have a max. authorised rotation speed higher than that of the spindle moulder
• which conform to DIN EN 847-1 or DIN EN 847-2 standards and
• which are marked with „MAN“!
4.7.2 Spindle moulder unit
4.8 Chip extraction
Saw unit
aggregate
Saw guard
Dust extraction outlet, Ø
120 mm
50 mm
Min. air speed
20 m/s
20 m/s
Min. vacuum
1824 Pa
953 Pa
Min. volume flow (at 20 m/s)
814 m³/h
141 m³/h
*)
Standard =
Saw guard
/ Option =
Overhead saw guard
Spindle moulder unit
Spindle moulder
fence
Slotting guard
Dust extraction outlet, Ø
120 mm
120 mm
Min. air speed
20 m/s
20 m/s
Min. vacuum
470 Pa
920 Pa
Min. volume flow (at 20 m/s)
362 m³/h
814 m³/h
*)
Standard =
Spindle moulder fence
/ Option =
Slotting guard
Specifications
