Hammer Strength PT-ST, Assembly Instructions Manual

Page: 19 / 22

3. Install two screws and two washers securing console bracket to console crossbar using a 13 mm socket wrench.
Torque to 7 ft-lbs.
Item Description Qty
1 Console bracket 1
2 Screw, M8 X 1.25 X 16 mm 2
3 Washer, M8 X 19 X 1, Flat 2
4 Console crossbar 1
Install Batteries
1.
Remove four screws and four washers securing battery cover to console crossbar using a Phillips screwdriver.
Item Description Qty
1 Console crossbar 1
2 Battery cover 1
3 Screw 4
4 Washer 4
2. Install two D cell batteries into battery holder.
NOTE: Make sure batteries are installed in the correct direction.
Item Description Qty
1 Console crossbar 1
2 Battery cover 1
3 Battery holder 1
3. Install four screws and four washers securing battery cover to console crossbar using a Phillips screwdriver. Torque
to 5 in-lbs.
Page 17 of 19