Hammer Strength PT-ST, Assembly Instructions Manual

Page: 18 / 22

6. Install two screws, four washers, and two nuts securing console crossbar to right handrail and upright using a 17
mm open end wrench and 17 mm socket wrench. Torque to 20-25 ft-lbs.
Item Description Qty
1 Screw, M10 X 1.5 X 80 mm 2
2 Washer, M10.5 X 22 X 2, Flat 4
3 Right handrail and upright 1
4 Nut: Hex, M10 X 1.5 2
7. Tighten two lower screws and two nuts using a 17 mm open end wrench and 17 mm socket wrench. Torque to
20-25 ft-lbs.
Install Console
1.
Plug console cable into upper console cable.
Item Description Qty
1 Console cable 1
2 Upper console cable 1
3 Console bracket 1
4 Console crossbar 1
2. Lower console bracket onto console crossbar.
NOTE: Do not pinch console cable.
Page 16 of 19