Hammer Strength HD SPARC, Owner'S Manual

Page: 27 / 34

Replace with two, D cell, alkaline batteries only. Always use two new equal batteries, of the same current rating and
manufacturer.
1. Remove the battery access cover by loosening the screw using a flat head screwdriver. The screw will remain in the
battery access cover.
Item Description Qty.
1 Console 1
2 Battery Access Cover 1
3 Screw 1
4 Console Cable 1
• The battery access cover screw will remain in the battery access cover.
• The battery access cover will remain on the console cable.
2. Remove the two batteries from the console.
3. NOTE: The batteries must be installed in the proper direction.
Install two batteries as shown.
Item Description Qty.
1 Console 1
2 Battery, D Cell 1.5V Alkaline 2
Page 25 of 30