Hammer Strength HD SPARC, Owner'S Manual

Page: 12 / 34

Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Component and Hardware List
Components
Item Description Qty.
1 Base Assembly 1
2 Handrail Assembly 1
3 Foot Pad 2
4 Owner’s Manual 1
Hardware
Item Description Qty.
1 Hardware Kit, HD SPARC 1
2 Bolt, .312-18 x .5, HXS 6
3 Battery, D Cell 1.5V Alkaline 2
Tools Required
• Flat head screwdriver
• 1/2” Socket with Torque wrench
• 1/2” Open end wrench
• 9/16” Open end wrench
• 4 mm Allen wrench
Lift and Move Unit
1.
Remove lag bolts and shipping supports. Keep package material on linkage arms at this time. This will protect the
paint from scratching during assembly.
2.
Grasp each rear support leg firmly and lift with one person on each side.
3.
Lift the lower rear support legs so the front transport wheels are able to roll on floor.
Use proper lifting methods.
4.
Move unit to intended location.
5. Lower rear support legs.
Page 10 of 30