HAMMELMANN HDP 502 / S 1100-50, Operating Instructions Manual, Page: 275 / 311

Technical data Page 1 of 3 Chapter 9
For local contact details:
www.sterlingfluidsystems.com In the search to improve continuously its products,
Sterling Fluid Systems reserves the right to modify its
products at any time without prior notice.

(Sterling Fluid Systems BV) 2001
9. Technical Data
For technical information about the pump or pump
set, which is not described in this chapter, see the
specific data sheet. Note that data relating to a
specific order may conflict with information
provided here. In any such case, the order
specific information will override data provided in
the general technical documentation.
Pressure component operating limits:
Material Temperature Pressure Sizes
4B
-40ºC to 120ºC 16 bar All
120ºC to 170ºC 14 bar All
0B/0C/0E -20ºC to 120ºC
16 bar
10 bar
14 bar 32125 to 80315
80400 to 300500
150500
120ºC to 170ºC
14 bar
9 bar
8 bar 32125 to 80315
80400 to 300500
150500
Shaft sealing operating limits:
Shaft sealing execution Temperature range
041, 052
BJ3, BJS, BJJ
AF3, AX3, AY3, A93
AFS,AXS,AYS,A9S,AFK,AXK,AYK,A9K
C23, C2S, C2J -40°C to + 110°C
-20°C to + 120°C
-30°C to +150°C
-20°C to + 180°C
-40ºC to + 150ºC
Flange locations:
Axial suction flange, discharge flange radially
upwards.
Flanges:
Material design 4B: Complies with DIN 2543
PN16.
Material design 0B, 0C, 0E : DIN 2533 PN16 /
2532 PN10
1)
Flanges drilled according to ANSI 150 can be
supplied.
1)
150-200,150-250 and 200-250
Direction of rotation:
Clockwise seen from the drive end of the pump.
Materials of construction, and of shaft seals:
See Chapter 2.4.
Vibrations:
ZLND range pumps comply with VDI 2056 and
ISO 5199 Class K for pumps with a driving power
of up to 15 kW and Class M with a driving power
of more than 15 kW
Noise levels:
The noise levels of the pump comply with the
Directive 001/30 - 1992 of the EUROPUMP
Commission.
The following table provides approximate values:
P (kW)
L
WA
(dB)
pump without motor
Note that additional noise can be generated by:
•
the driver.
•
a possible misalignment of the coupling.
•
pipework (note: the larger the pipe diameter,
the lower the pipe noise).
•
All indicated operating limits are not valid
for all liquids which can be pumped. See
technical data or delivery note.
ATTENTION
HAMMELMANN Code no.: 04.03226.0769
Type 32-200