11
3.3 Change the password
If you need to change the password, follow the steps below.
1. Press the CANCEL (*) button and connect the enclosure to the
computer with the USB cable.
Keep pressed the “*” button for about 5 seconds until red, green
and orange LEDs turn on.
2. Input the current password and press “#” to confirm.
The orange LED switches off.
3. Now input the new password and press ENTER (#) to save it.
4. Input the new password again and press “#” to confirm. If the
new password is set up correctly, the red LED switches off and
the blue LED turns on.
Summary of Contents for USB 3.0 STORAGE STATION
Page 5: ...5 Product overview...