Wireless ADSL Router
HRDSL521W
35
WEP
Key 1 to Key 4:
Enter the key to encrypt wireless data. To allow encrypted data
transmission, the WEP Encryption Key values on all wireless stations must be the same as
the router. There are four keys for your selection. The input format is in HEX style, 5 and 13
HEX codes are required for 64-bitWEP and 128-bitWEP respectively.
If you chose
WEP 64-bits
, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose
WEP 128-bits
, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
Note:
If you have enabled WPS function , then you can’t select one of WEP 64-bits/ WEP
128-bits in the Authentication Type section to enable WEP Secturity.
WPA-PSK / WPA2-PSK
Encryption:
TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption
method and incorporates Message Integrity Code (MIC) to provide protection against
hackers.
Pre-Shared key:
The key for
network authentication. The input format is in character
style and key size should be in the range between 8 and 64 characters.
