Wireless ADSL Router
HRDSL521W
15
3.4 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled
to automatically get
the WAN port configuration
from the ISP, but you have to
set the username and
password first.
3.5 Information from your ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC / LLC-based multiplexing, Username, Password,
Service Name, and Domain Name System (DNS) IP address
(it can be automatically assigned by your ISP when you
connect or be set manually).
PPPoA
VPI/VCI, VC / LLC-based multiplexing, Username, Password
and Domain Name System (DNS) IP address (it can be
automatically assigned by your ISP when you connect or be
set manually).
MPoA (RFC1483/
RFC2684)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet
mask, Gateway address, and Domain Name System (DNS)
IP address (it is a fixed IP address).
IPoA (RFC1577)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet
mask, Gateway address, and Domain Name System (DNS)
IP address (it is a fixed IP address).
Pure Bridge
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
