manualshive.com logo in svg

Hamilton GEN 2 DTI, Programming Manual, Page: 15 / 45

Share
Download
Hamilton GEN 2 DTI Programming Manual Download Page 15

Document #101-0291

15

4/2021

System – Network (continued)

•  Press 3 for Back

•  Press 2 for Back

•  Press 2 for Back

•  Press 2 for Back

•  Press 3 for Back 

System - Cards

Main Menu/System/Cards

•  Press 4 for Cards

•  The next screen displays: 

     

1. 

Card Settings

2.  Back

•  Press 1 to enter Card Settings

•  The next screen displays: 

1. 

Settings

2. 

Surcharge

3.  Back

•  Press 1 to enter Settings

•  The next screen displays: 

1. 

Credit Card Enable

2. 

Gift Card Enable

3.  Accepted Tracks

4. 

Pre-Auth Amount

5.  Back

•  Press 1 for Credit Card Enable

This menu lets you determine if you want to enable credit cards on the DTI/DTT. By default, its set to 

ENABLE. If you wish to change this, use the arrow keys to move the marker and Press F4 to save.

•  Press 2 for Gift Card Enable

Gift Card Enable lets you change your acceptance of Hamilton Gift Cards at the DTI/DTT. By default, 

this is set to DISABLE. If you wish to change this, use the arrow keys to move the marker and Press F4 

to save.

SYSTEM

Summary of Contents for GEN 2 DTI














































Reviews:

No comments