Revision Description:
Request Number:
Issue Code(s):
Updated Information
DOC3934
CS, SP
Revision Date:
07/19/12
Document #:
Approved by:
520007100
DOC3934
Page:
6
of
5
Rev:
B
ENG-FRM-RIC-4.32, Rev. E
Technical Data Sheet
HBH 650
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and
proprietary and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and
any information contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article
fabricated or assembled from this document without the prior written consent of HBB.
Replacing the Drive Coupling
-
Use a 5/16
th
hex wrench to secure the bottom of the motor drive.
-
Use pliers or a similar tool to loosen the drive coupling counterclockwise.
-
Replace drive coupling by screwing it on to motor drive clockwise.
How to Determine Cycle Count
-
Turn the on / off switch to the “off” position.
-
Unplug the machine.
-
Turn the machine upside down and position so that you can look into
the right grill with the control buttons facing you.
-
Plug the machine into a power source.
-
Use the on/off switch to turn the machine on.
-
Count and record the number of flashes from the LED lights; first Red, then
Yellow, then Green.
-
You can use the on on/off switch to restart the process at any time.
-
Once complete add two zeros to the end. This is your cycle count.
-
Example: Red – 2, Yellow – 0, Green – 8. You have recorded 208. At the end
add two zeros - 20800. Your cycle count is 20,800.
