11
Troubleshooting
The Pasta Maker may display an error message from time to time. Use the table below to quickly resolve the issue.
Error Code
Situation
Solution
E02
Mixing bowl Lid is not in place.
Make sure Lid is snapped onto Mixing Bowl.
E14
Too much flour in the Mixing Bowl.
Remove some flour from Mixing Bowl.
E16
No liquid in the Mixing Bowl.
Add correct amount of liquid.
E04, E05, E09, E15, E17 Call Customer Service at 1.800.851.8900.
none
Dough is too wet.
1. Press START/STOP button and unplug.
2. Remove Lid and break up any clumps or balls of dough with your hands.
3. Add 2 tablespoons (30 ml) of flour to dough, then replace Lid and plug back in.
4. Press KNEAD DOUGH, then START/STOP button.
5. Repeat as necessary for desired consistency.
none
Dough is too dry.
Add 5–10 ml liquid and continue to mix. Press KNEAD DOUGH button, if necessary.
If the Pasta Maker stops working:
• Unplug.
• Wait 5 seconds, and then plug back into outlet.
• Use Manual Mode to finish kneading or extruding pasta.
840303500 EN v06.indd 11
6/29/18 5:31 PM
