ASSEMBLY
ASSEMBLY STEPS
STEP 1: Cart
(cont.)
2.
Attach the wing nut onto the bolt and tighten as shown in
Fig. 2a.
3.
Attach M6 x 12 screw to four support plates and tighten with hex key (provided) as shown in
Fig. 2b.
4.
Using the hex key, tighten each M6 x 12 screw holding the other end of the crossbars, as
shown in
Fig. 2c.
5.
Place the accessory hooks (4) onto the bumpers on the side panels as shown in
Fig. 2d.
Fig. 2
10
Fig 2a
Fig 2d
Fig 2c
Fig 2b
840252000 ENv12.indd 10
10/31/14 11:25 AM
Summary of Contents for 84340
Page 61: ...61 REMARQUES ...
Page 95: ...95 NOTAS ...
