5
Flat Beaters, Straight Wire
Beaters and Whisk
1.
Make sure mixer is unplugged and
speed control is set to OFF.
2.
Insert a beater or attachment into an
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
attachment.
Twisted Wire Beaters and Dough
Hooks
1.
Insert the wire beater or the dough
hook with the
collar into the
opening indi-
cated by the
illustration on
the mixer.
2.
Align tabs on the beater or dough
hook with the
slots in the
opening. Push
until it clicks
into place.
Repeat with
other beater or
dough hook.
To Insert Attachments
Collar
Tab
Slot
1.
Make sure mixer is unplugged and
speed control is set to
0
(OFF).
Insert beaters.
2.
Plug mixer into electrical outlet.
Place beaters into bowl.
3.
Move the speed control to desired
speed, starting at 1 and increasing to
a higher speed as necessary.
Using Your Mixer
4.
When finished mixing, move the
speed control to
0
(OFF) and
unplug mixer.
5.
To eject beaters, push straight down
on the eject
button.
840163800 ENv03.qxd 4/10/07 2:51 PM Page 5
