3
Know Your Blender
Parts and Features
1. Filler Cap
2. Lid*
3. Jar
4. Gasket
5. Cutting Blades
6. Safety Base
7. Control Panel
8. Base
The length of the cord used on this
appliance was selected to reduce the
hazards of becoming tangled in, or tripping
over, a longer cord. If a longer cord is
necessary, an approved extension cord
may be used. The electrical rating of the
extension cord must be equal to or greater
than the rating of the blender. Care must be
taken to arrange the extension cord so that
it will not drape over the countertop or
tabletop where it can be pulled on by
children or accidentally tripped over.
The Hamilton Beach/Proctor-Silex, Inc.
Type FP04 food processor attachment is
intended for use with some blenders. The
Type FP04 food processor attachment may
draw less power than the marked rating.
If the cutting blades lock and do not move,
it will damage the motor. Do not use. Call
the toll-free customer service number for
information.
Do not place blender jar in the freezer filled
with food or liquid. This will freeze and
damage the cutting blades.
Before First Use:
After
unpacking the blender, wash
everything except the blender
base in hot, soapy water. Dry
thoroughly. Wipe the blender
base with a damp cloth or
sponge. DO NOT IMMERSE
THE BASE IN WATER. Care
should be taken when handling
the cutting blades as they are
very sharp.
*
Some blender lids come with
a lid and lid
seal.
840077500 ENv03.qxd 3/2/01 3:05 PM Page 3
