5
Wash all removable parts in warm,
soapy water. No parts may be washed
in a dishwasher.
Water pump must be “primed” before
first use to work properly.
Operating without water in Water
Reservoir can permanently damage the
appliance.
Before First Use
(Priming the Pump)
4.
When unit is ready, Temperature
Ready Light next to Steam/Espresso
Button will come on. Place an empty
container under Frothing Nozzle so that
nozzle is completely inside container.
5.
Turn Steam Control Dial
counterclockwise to (steam). Press
Start Button to pump hot water out of
Frothing Nozzle for cleaning purposes.
6.
Fill container about halfway full.
NOTE:
Green light next to Steam/
Espresso Button will go off once Start
Button is pushed.
7.
Press Start Button again to turn
Frothing Nozzle off; then turn Steam
Control Dial clockwise to
(no
steam).
2.
Fill Removable Water Reservoir to
MAX fill line with cold water and
replace securely on back of unit.
1.
Make sure all three buttons are in
OFF position (not pushed in) and that
Steam Control Dial is turned fully
clockwise to
(no steam).
3.
Plug into outlet. Press ON/OFF Button
to turn unit ON.
w
WARNING
Electrical Shock Hazard.
Do not
immerse machine, cord, or plug in water or any other liquid.
