7
How to Use
OR
1.
Make sure all three buttons are in
off position (not pushed in) and that
Steam Control Dial is turned fully
clockwise to
(no steam).
2.
Fill Removable Water Reservoir with
desired amount of cold water and
replace securely on back of unit.
3.
Place Ground Espresso Holder into Filter
Holder. Add one tablespoon (5 g) of ground
espresso for each cup being made. Use
shallow Holder for 1 cup (237 mL) and deep
Holder for 2 cups (474 mL). Press grounds
firmly into Holder with Tamping Tool.
3.
Place pod into Filter Holder. When
using single-serve pod, always use
shallower Espresso/Pod Filter Holder.
Never put two pods in either Filter
Holder at one time.
4.
Holding handle securely, align raised dimple on exterior of Espresso/Pod Filter Holder
with cutout notch on inside of Filter Holder. Rotate Espresso/Pod Filter Holder 180º to
secure in base. Ensure no grounds are on rim of Filter Holder.
5.
Rotate Filter Holder to right until it is
firmly locked into place.
6.
Plug into outlet. Press ON/OFF Button
to turn unit ON. When ready,
Temperature Ready Light next to
Steam/Espresso Button will come on.
