7
1.
Plug the iron into outlet.
2.
Set Adjustable Steam Control to
0
(Dry Iron).
3.
Turn Temperature Control Dial to
desired temperature. Allow 2 minutes
for iron to reach desired temperature.
4.
To turn iron off, turn Temperature
Control Dial to OFF and unplug iron.
To Dry Iron
To Steam Iron
6
1.
Unplug iron. Set Adjustable Steam Control to
0
(Dry Iron).
Hold iron with soleplate parallel to the ground.
2.
Using a cup, slowly pour tap water into water fill opening
until MAX fill line is reached. Do not fill iron directly from
the faucet.
3.
Plug iron into outlet.
4.
Turn Temperature Control Dial to desired fabric setting in
the steam range.
5.
Allow 2 minutes for the iron to reach
desired temperature.
6.
Set Adjustable Steam Control to desired
steam setting.
7.
To turn iron off, set Set Adjustable
Steam Control to
0
(Dry Iron). Turn
the Temperature Control Dial to OFF.
Unplug iron.
8.
Empty water from the iron following directions in “Care and
Cleaning.”
Water:
Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water
for use in the iron.
Iron
High Temp
Setting
Med Temp
Setting
Low Temp
Setting
Fabric care labels on garments have symbols that show
ironing instructions and recommended temperature settings.
These symbols are shown below along with their meaning.
Do Not
Iron
Do Not
Use Steam
Fabric Care Label Symbols
DRY IRON:
Synthetics, Silk/Wool (reverse side of fabric)
STEAM IRON:
Cotton (while damp; use steam or spray)
Linen (while damp on reverse side of fabric)
NOTE:
To prevent possible garment damage, we do not
recommend ironing fabrics labeled “Dry Clean Only.”
840182702 ENv01.qxd:840144500 Ev02.qxd 7/26/12 12:41 PM Page 6
