Hamilton Beach Commercial PrimaVac HVC254-CE, Operation Manual

Page: 4 / 164

4
Control Panel
ON (I)/OFF ( )
Turns the unit
on and off.
FUNCTION SELECT
Selects vacuum or
seal modes.
DISPLAY
Shows active
function during
program cycle or
set value when
idle. Counts
down time
remaining for
each step in the
process.
VACUUM INDICATOR
Indicates vacuum mode
is selected or activated.
SEAL INDICATOR
Indicates sealing
mode is selected or
activated.
+/STOP VAC
During cycle, stops
vacuum process
and continues to
sealing process.
Increases
time when
programming.
–/STOP
During cycle,
interrupts
process and ends
cycle. Decreases
time when
programming.
PROGRAM SELECT/
OIL PREHEAT
FUNCTION
Enters program
switching mode.
When pressed for
more than 3 seconds,
initiates preheating
function.
VACUUM GAUGE
Indicates the vacuum
pressure in the
vacuumed space.
8.8
The complete CE declaration of conformity documentation for this appliance is available in the
Technical Support section of our website www.hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact on the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.