7
Änderungen vorbehalten
7. USB-Driver Installation
STOP
Attention!
The HO730 USB driver can be installed only on the
PC, if the following conditions are fulfi lled:
1
st
: A Combiscope with USB interface HO730 fi tted
and activated is attached at the PC.
2
nd
: Operating system Windows 2000 or XP is used.
Providing a connection between PC and oscilloscope has been
established and there is no HO730 driver installed, the opera-
ting system answers “Found New Hardware”. In addition the
“Found New Hardware Wizard” is displayed. Only in this case
the USB-Driver must be installed.
The USB Driver is located in the directory “HO730_D2xx_Dri-
ver
7.1 Installation under Windows XP:
7.1.1 Please choose “No, not this time” and click “Next”.
7.1.2 Select “Install the software automatically (Recommended)“
and click „Next“.
7.1.3 The wizard now searches for HAMEG HO730. If the driver
software has been found, please continue with item 7.1.4.
7.1.3.1 If the driver software has not been found, the message
„The wizard could not fi nd the software for ... ? HAMEG HO730”
is displayed. Please click “Back” until item 7.1.2 is displayed.
7.1.3.2 Select “Install from a list or specifi c location (Advanced)”
and click “Next”.
I n s t a l l i n g t h e U S B - D r i v e r
