background image

11

Subject to change without notice

8.3 Ethernet interface parameters at the host (PC)

8.3.1 Parameters under Windows XP

Reference! In order to be able to accomplish the following 
parameters, you have to be announced at the host concerned 
(PC) as “administrator“, or you have to be member of the user 
group “administrators“ (e.g. in the network).

To preset the interface parameters of the Ethernet LAN inter-
face at the host PC please go to “Start“ menu and select under 
the menus “Control Panel“ 

>

 „Network connections“ the menu 

“Local Area Connection“. In the new opened window to “Local 
Area Connection Properties“ please click on “Internet Protocol 
(TCP/IP)“ and click on “Properties“.

 

In the new opened window “Internet Protocol (TCP/IP) Proper-
ties“ please click on “Alternative Confi guration“ and select the 
option “User confi gured“ for the manual preset of the network 
parameters. In the input fi eld „IP address:“ please enter from 
your (or from a network administrator specifi ed) IP address 
for the PC (e.g. 192.168.10.2). In the input fi eld “Subnet mask“ 
please enter from your (or from a network administrator spe-
cifi ed) subnet mask for the PC (e.g. 255.255.255.0). In the input 
fi eld “Default gateway“ please enter your (or from a network 
administrator specifi ed) IP address of the gateway (e.g. the IP 
address of the router of its LAN network). With a direct con-
nection of oscilloscope and host (PC) over a network cable this 
input is optional.

Reference! The preset IP addresses at the oscilloscope and at 
the host (PC) have to be different and be in the same subnet (ex.: 
oscilloscope 192.168.010.010, PC 192.168.010.002, with subnet 
mask 255.255.255.000).

 

If you attached the oscilloscope and the host (PC) to a network 
with existing DHCP server (with activated DHCP function), 
the presets for IP address, subnet mask and gateway of the 
existing DHCP server are assigned dynamically automatically. 
In this case you don’t need the described manual presets of 
IP address, subnet mask and gateway. In the opened window 
“Internet Protocol (TCP/IP) Properties“ please click on „Alter-
nate Confi guration“ and select the option „Automatic private 
IP address“.

 

After the presets you confi rm the inputs please click „OK“.

          E t h e r n e t  c o n f i g u r a t i o n

Summary of Contents for HO730

















Reviews: