5
Änderungen vorbehalten
5. Interface Fitting Instruction
STOP
Safety!
The following procedures must only be carried out
on condition that the mains (line) power cable is not
connected to the oscilloscope and no connection is
made at the measurement inputs.
STOP
Attention!
To avoid damage of the interface during removing
and fi tting by electrostatic discharge, please link a
metal part of the oscilloscope to equalise potentials
between oscilloscope and your body. Maintain this
connection during the fi tting/removing!
Only touch the interface at its mounting panel!
5.1 Removing the existing interface
5.1.1
Remove both fastening screws.
5.1.2
Pull out the interface.
5.2 Fitting the interface HO730
5.2.1
Insert the interface HO730
in the opening in such a way, that
the PCB will be inserted in the
guides - visible on both sides – and push it in completely.
5.2.2
Fit the interface with the fastening screws previously (item
4.1.1) removed.
F i t t i n g o f t h e H O 7 3 0
