HAMAR LASER L-708, Operation Manual

Page: 14 / 33

11
The A-514GS and A-514GL Leg-Setting Gage
The gages are used to set the A-514 Adapter legs to the correct bore diameter. The gages are available in
two sizes, depending on the size of the bore being measured. The A-514GS is used with the small (A-
514A) or medium (A-514B) bore adapters. The A-514GL can be used for all three adapters and must be
purchased if using the large bore adapter.
Figure 6 –
The A-514GS (left) and A-514GL (right) Leg Fixtures
Assembling the A-514GS and A-514GL
1. Using the bolt and Allen wrench provided, tighten the hub to the
plate.
2. Once the hub is tightened, turn the plate right side up and slide
the spacer over the hub.