3
The L-733 Precision Triple Scan
®
Laser
The L-733 Triple Scan Laser was specifically designed for
machining centers to measure and correct machine geometry.
It has all of the innovative and highly useful features of the L-
743 Ultra-Precision Triple Scan Laser, with lower accuracy
and a medium adjustment base. It is very useful for checking
the alignment of large fabrications or aligning large airplane
sections in aircraft manufacturing.
In most cases, all it takes is one setup to measure flatness,
straightness, parallelism and squareness. Since the system
provides live measurements, any errors that are found can be
fixed with the same setup. The laser mounts on a machine or
stable base so that the laser plane can project the measurement
reference out to 100 ft. (33 m) in radius for each laser plane.
Applications:
(for alignments with tolerances of .0005 in/ft or (0.038 mm/m) or greater)
•
Machining centers (HBM, VBM, VTL, VMC, HMC,
gantries, surface grinders)
•
Water jet and laser cutting machines
•
Leveling machine beds and ways
•
Checking the alignment of large bearing surfaces and
fabrications
•
Roll alignment (rubber, steel, textile and lower
accuracy film lines)
•
Aircraft assembly (seat track alignment, setting water,
butt and station planes, wing-to-body and body-to-body
join alignment, etc.)
•
Saw mills
•
Vertical press alignment
Measuring and aligning:
•
The flatness of almost any horizontal or vertical surface
(squares, frames, ways, flanges, circles, etc.) or axes
•
The squareness of any 2 vertical surfaces or axes
•
The straightness of vertical and horizontal axes
•
Measuring surfaces up to 200 ft. (66 m) long with
one setup
•
Way twist and parallelism between vertical or horizontal
surfaces
•
The parallelism of vertical or horizontal surfaces,
even if those surfaces are 100 ft. (33 m) apart
•
Way twist and parallelism between vertical or horizontal
surfaces
•
The squareness of any vertical machine axis or
surface to horizontal axis or surface
•
Checking plumb of a vertical surface up to 100 ft.
(33 m)
Features:
•
Continuously rotating laser planes with operational
range of 100 ft. (33 m) in radius.
•
Completely self-contained
•
Laser planes flat to 2 arc seconds in 180º sweep and 1
arc-second in 90º sweep. Planes are mutually square
to 2 arc seconds.
•
Standard target: A-1519-2.4ZB Single-Axis Wireless
Target providing live data display
•
System uses Windows-based software for quickly
recording and analyzing machine geometry data
•
Typical setup time 20 minutes or less
•
Diode laser 2 times more stable than HeNe-based laser
systems
•
Includes Pitch/Roll/Yaw base with medium-
resolution adjustments and lighted levels. Levels
accurate to 2 arc seconds.
•
Instant ON, with virtually no warm up
•
Battery or AC powered
