8
Figure 3:
EQ-400 Controller Back
EQ-400 Controller
–
Back
Component
Description
1
Water inlet/outlet fittings
Connections for cooling water for the internal laser module.
2
Lamp Control Connector
(9-pin D-sub)
Provides various power and control signals to/from the Lamp module. No other connector
or cable may be used with the EQ-400 other than the one supplied.
3
I/O Interface Connector
Provides access to control and status signals. Control signals are only active when the
system is in remote control mode. See Section 10.3 for pin assignments and functions.
This connector also functions as the remote interlock connector.
4
RS-485 Connector (9-pin
D-sub)
Connector for optional RS-485 interface. See Sections 3 and 4 for electrical details and
commands.
5
Power Input Connector
This is a fused IEC 320 inlet connector for AC power input. Fuses are 5 x 20mm, 10A, 250V,
time delay type.
6
Laser fiber
Transmits laser energy from the Controller to the Lamp
Figure 4:
EQ-400 Lamp Side view
EQ-400 Lamp
–
Side view
Description
1
Output window
The lamp window at the optical output provide protection from the high pressure bulb inside
the Lamp. An internally-threaded SM30 adapter is provided for easy connection of optical
hardware. A retroreflector is installed on the output window on one side of the Lamp. In
