C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
10-2-5 EXTERNAL TRIGGER MODE
The camera has various external trigger functions to synchronize the camera with the
external equipment. In the external trigger mode, the external equipment becomes a master
and the camera becomes a slave.
Note
•
Please contact to Hamamatsu subsidiary or local distributor for the detail of the timing information.
10-2-5-1 Edge trigger mode
The edge trigger mode is used so that the exposure starts according to an external signal.
Exposure time is set by software command. In this mode, the exposure of the first line begins
on the edge (rising/falling) timing of the input trigger signal into the camera. (1023H and 1024H
in the following figure) The exposure of the second line is begun after the readout time of one
line passes (1022H and 1025H in the following figure), and the exposure is begun one by one
for each line.
Figure 10-7 (Ex. rising edge)
34
