95
Setup and connection
PN40HD
g
Requirements for the place of operation
For safe and trouble-free operation of the device, the place of opera-
tion must satisfy the following requirements:
The device must be set up on a solid, flat and horizontal surface.
■
The device is designed for operation within an ambient tempera-
■
ture range from +5 °C to +35 °C .
Do not use the device in a hot, wet or very humid environment .
■
Do not expose the device to direct sunlight .
■
Do not install the device in the vicinity of magnetic fields.
■
Make sure that there is sufficient space for ventilation.
■
The mains socket must be easily accessible and enable fast
■
disconnection in the event of an emergency .
Electrical connection
For safe and trouble-free operation of the device, the following in-
structions on electrical connection must be observed:
The device is supplied with 5V DC voltage via the AC adapter
■
provided . Only use the AC adapter provided when connecting to
the mains supply .
Before connecting the device, compare the connection data of the
■
AC adapter (voltage and frequency) on the rating plate with those
of your mains supply . This data must correspond in order to avoid
damage to the device .
Make sure that the adapter cable does not come in contact with
■
hot surfaces or sharp edges .
Make sure that
■
the adapter cable is not stretched tightly or
twisted .
Do not allow the adapter cable to hang over edges (danger of
■
tripping) .
If the device is not to be used for a longer period of time, discon-
■
nect the AC adapter from the mains supply .
