Hama Passion Chop, Operating Instructions Manual

Page: 9 / 200

9
Check the status of the status LED (3)
If the status LED (3) of an earphone is flashing alternately and the
announcement is:
the earphones are searching for a Bluetooth
®
connection�
If the status LEDs (3) are flashing and the announcement is:
the earphones are already paired with a Bluetooth
®
device�
Search using your device for the earphones (only required on the first connection)
Open the Bluetooth
®
settings on your device and wait until the list of
found Bluetooth
®
devices shows Hama Passion Chop � The announcement "Pairing" is heard�
Select Hama Passion Chop and wait until the earphones are shown
in your device's Bluetooth ® settings� The announcement "Connected" is heard�
Note - Bluetooth
®
password
Some devices require a password in order to connect to another Bluetooth
®
device�
• If your device requests a password to connect to the earphones, enter 0000 �
Disconnecting the Bluetooth ® connection
Disconnect the earphones via your device's Bluetooth
®
settings� The announcement
"Disconnected" is heard�
1
2
3
Password
Bluetooth
Hama Passion Chop
ON
0000
green/red
green