17
For Windows® /XP only
The following information confi rms the selection of the confi guration assistant. The software provided
with the stick or the Windows ® software can be used. We advise you to use the software provided with
the stick. Click
Next
and select
WLAN 802.11g USB 2.0 adapter assistant
and click
Next
to confi rm.
A message appears informing you that the driver is being installed automatically:
Click
OK
to confi rm straight away as
you have already connected the stick.
The message that the software has not passed the Windows® logo test may appear while the driver is being
installed:
This only means that the test has not been performed. The sta-
bility and function of the driver was tested thoroughly before
delivery. The qualifi cation of the drivers by Hama means that
new versions can be used far earlier and do not have to wait
for the Windows® logo test. Click
Continue anyway
to confi rm
the message.
After installation,
“InstallShield Wizard complete”
is displayed. Now remove the CD-ROM from the drive and
restart the computer by selecting
„Yes, I want to restart my computer now”
and clicking
Finish
.
After the restart, you can confi gure the WLAN adapter.
2. Quick
confi
guration
If you are already somewhat familiar with the confi guration of wireless LAN devices, this quick guide should
be enough to prepare the device. If you have no experience with wireless LAN devices, please read the
comprehensive instructions from page 18.
1.
Open the wireless LAN confi guration utility by clicking the
WLAN 802.11g client assistant link
on the
Desktop or under
Start/Programs/WLAN 802.11g USB Adapter/WLAN 802.11g client assistant
.
2.
Change to the
Profi le management
tab and click
Scan
!
3.
Select the required network in the list and click
Activate
!
4.
Name the profi le in the next window. Switch to the
Security
tab.
5.
Select the encryption mode used in the target network and then click
Confi gure
. If no encryption is used
in the target network, switch to the
Advanced
tab and ignore item 6.
