11
Note – Dew point
•
The dew point temperature indicates a value to which, with the current humidity level, the outside
temperature would have to increase/decrease in order to reach 100% relative humidity.
6.5 Alarm mode
•
Repeatedly press the
ALM
button (29) to access
HI AL
(4/11/16/21) or
LO AL
(4/11/16/21) alarm mode.
•
In alarm mode
HI AL
(4/11/16/21), repeatedly press the
SET
button (28) to switch between the following
alarm functions:
•
Alarm (hour/minute) (24)
•
High room humidity alarm (14)
•
High room temperature alarm (12)
•
High outside humidity alarm (20)
•
High outdoor temperature alarm (18)
•
High absolute atmospheric pressure alarm (5)
The applicable display begins to flash.
•
In alarm mode
LO AL
(4/11/16/21), repeatedly press the
SET
button (28) to switch between the following
alarm functions:
•
Alarm (hour/minute) (24)
•
Low room humidity alarm (14)
•
Low room temperature alarm (12)
•
Low outside humidity alarm (20)
•
Low outdoor temperature alarm (18)
•
Low absolute atmospheric pressure alarm (5)
The applicable display begins to flash.
•
In the corresponding display, press the
MIN/MAX
button (30) or the
+
button (31) to change the alarm
value, and confirm your selection by pressing the
SET
button (28).
•
In the corresponding display, press the
ALM
button (29) to activate/deactivate the corresponding alarm
function.
•
If the alarm is activated, the corresponding symbol (6/10/15/26),
HI AL
(4/11/16) and/or
LO AL
(4/11/16)
is displayed.
•
If you do not make an entry for 20 seconds, you automatically exit setup mode. Alternatively, press the
SNOOZE / LIGHT
button (32) to exit setup mode before selecting all the values.
Note
•
The set value is displayed for alarms that are already set, deactivated alarms are indicated by --- or --.