Instruction Manual PSx3xxEIP
20
Name
Par.
Number
Function
Type/
Range
Back
up
Delivery
State
R/W
Parameter group “others” (continued)
delivery state 113
writing “-3”:
sets the values of all parameters to the
delivery state, erases the IP address, sets
the address assigning method to DHCP
and saves all parameters in the EEPROM
writing “-2”:
sets the values of all parameters to the
values which are saved last by the user,
without saving the parameters in the
EEPROM
writing “-1”:
sets the values of all parameters to the
delivery state, without saving the
parameters in the EEPROM (IP address
and address assigning method stay
unaffected)
writing “1”:
saves all parameters in the EEPROM
reading directly after boot:
0
content of memory correct
≠ 0
content of memory incorrect
reading after saving:
0
saving finished successfully
≠ 0
saving is still in progress or is
finished incorrectly (the time for saving is
up to 200 msec)
Changes only possible when at standstill
-3, -2, -1
or 1
(writing)
0...2
(reading)
15 bit
no
R/W
configuration
for
connection
timeout
118
Bits 1-0: configuration for connection
timeout (if a connection has been
established and lost)
0x00: continue moving (drive will continue
moving to the actual target position)
0x01: drive will abort any positioning
0x02: drive will move to a save position
which is defined by Par. 120
0x03: reserved
Bits 3-2: configuration of save position run
when no connection is being established
after a certain time at power-up
0x00: no save position run at power-up
0x01: save position run after 15 sec
0x02: save position run after 30 sec
0x03: save position run after 60 sec
16 bit
yes
1
R/W
