background image

When the HaloLog App is started, the Halo List screen will appear. The the top of the screen will show 
Found HaloFoggers” listed by the fogger’s individual serial number. Only HaloFoggers that are within 
range to the HaloLog App will be displayed. 

 

ACTION:

 Tap on a specific HaloFogger serial number to connect or ‘handshake’ to that fogger. 

 

You will automatically be taken to the Run Events Screen.

The bottom of screen displays “HaloLogs Stored on iDevice.”  This is a list of previously downloaded data 
logs identified by a fogger’s serial number. 

 

ACTION:

 Tap on specific HaloFogger serial number to view a previously downloaded run cycle 

 

log for review, editing or sharing. You will automatically be taken to the Run Events Screen to see   

 

this data.

Halo List Screen

The Run Events Screen shows a list of all Run ID’s that have been downloaded to the iDevice.

When a HaloFogger is connected to the iDevice the top row of the screen will display the Serial Number and 
total Run Time for that HaloFogger highlighted in GREEN.

The HaloLog data stored on the selected HaloFogger will download automatically after the Bluetooth® 
“handshake” has been established, which is indicated when the top row turns 

GREEN

.

Each Run Event is listed with specific information including: Run ID, Room, Building, Operator, Date, Cycle 
Start and Stop Time, and duration of run event.

The very bottom row of the screen (highlighted in light 

BLUE

) depicts how many records are kept on the 

HaloFogger and how many have been downloaded to the iDevice. 

 

ACTION

: Tapping on any run event will open the Run ID Screen where information on that run    

 

cycle can be edited. 

Run Events Screen

Button selections at the bottom of screen:

1.  

 

 

Tap to go to Email Screen to send data file by e-mail. 

2. 

 

  

Tap to return to Halo List Screen.

3.  

 

 

Tap to go to Utilities Screen to monitor data exchange between iDevice 

 

 

 

and HaloFogger. 

NOTE: Downloading of data will be interrupted if, during downloading, any input to the iDevice screen is 
initiated (tapping to select). Data downloading will resume the next time you re-connect.

Email

Utils

Halo List

HaloFogger®  Operation Manual_1911

Summary of Contents for HaloFogger STD 1911



















Reviews: