1. Plug HaloFogger into a power source. The Status Indicator Light on top of the fogger will illuminate
solid
GREEN
.
2. Using an iOS device with HaloLog App installed, stand within 10’ of a HaloFogger and open the
HaloLog App.
Connecting HaloLog™ App to HaloFogger®
3. The Halo List Screen will open automatically and begin searching the vicinity for any HaloFogger
equipped with the HaloLog Data Logger option. As the foggers are found, their serial numbers will be
displayed under “Found HaloFoggers.” If no foggers are found, “NONE” will be displayed.
4. To initiate a connection tap on any HaloFogger serial number displayed on the
Halo List Screen. When the connection is made the Run Events Screen will appear.
The top row of the screen will display the fogger’s Serial Number and the Total Run
Time for that unit highlighted in GREEN.
If the operator moves the iDevice out of range (10’ max) the connection will be lost.
The top row will no longer be GREEN and data downloading will be interrupted. To
re-establish the connection, move the iDevice back into range.
Only one iDevice with the HaloLog App installed can be connected to a
HaloFogger at a time.
Continue reading to see ‘screen’ for each action.
Connected.
Not Connected.
HaloFogger® Operation Manual_1911
