7.4 | REMOVE OLD SMOKE ALARM
Make sure the green power light is off on the alarm. You may have to twist the alarm to release it from the wall
or ceiling. Remove it carefully to keep from damaging your ceiling or wall.
Note: Your old smoke alarm might make a loud noise when removed. Follow the alarm’s disposal instructions to
properly dispose of your old smoke alarm.
7.5 | REMOVE OLD MOUNTING PLATE
Unscrew the mounting plate from the electrical box. Keep the screws from the old mounting plate.
7.6 | REMOVE OLD CONNECTOR
Unscrew the wire nuts to detach the 120V power connector from your old smoke alarm. If your wiring colors are
not black, red & white, you may want to take a quick photo of the old connector or label the wires in order to
perform the next step. Follow the color scheme on your old connector in order to ensure the correct connection!
7.7 | ATTACH THE HALO POWER CONNECTOR
Holding the white wire ends together, cap them with a wire nut and twist clockwise until it is secure. Do the
same with the remaining wires.
WARNING!
Improper wiring of the power connector or the wiring leading to the power connector
will cause damage to your Halo and may lead to a non-functioning device.
7.6
7.7
6
