Confidential
33
IMPORTANT INFORMATION:
•
Apply the below method to prevent the cable from getting jammed.
•
Start the refrigerator and make sure it is energized.
(You can check if the lamps compartment are on or off to see if the product is operating).
IMPORTANT INFORMATION:
You can use tape and similar protectors on parts you think this is necessary to protect the edges of the furniture
when placing the product.
WARNING:
The plug of the product must be accessible after installation. If the plug is not accessible after installation, the power
must be cut off from the main switch.
WARNING:
Make sure that the mains cable is not jammed when placing the product.
⚫
Push the product carefully towards the cabin to place it.
If there is strain during the placement of the product into the cabin:
-
The floor might be rough or uneven
-
Adjustable feet might be loose
(please see the relevant section to learn how to adjust the adjustable feet)
Nylon string
Power cord
Water hose
Move to wall
Summary of Contents for HRBIAF18PR
