7 |
P a g e
TEMPTAINER BASIC AND TEMPTAINER PREMIUM HEATING/COOLING
1.
Connect the power cable to an earthed electrical socket (230-240 V~).
2.
To activate/deactivate the cooling/heating process follow the instructions on picture below.
NOTE!
The regulator
on the front shows when the trolley has reached the actual temperature inside of the
trolley. The trolley has a pre-set thermostat, which may only be changed by a qualified service
engineer.
3. HEATING
The trolley should be switched on approx. 15 minutes before use so that the temperature reaches the
right heating temperature of approx. +80 °C.
Only place well heated items in the hot cabinet.
4. COOLING
The trolley should be switched on approx. 15 minutes (compressor cooling) and 40 minutes (peltier
cooling) before use so that the temperature reaches the right cooling temperature of approx. +4 °C.
The inner rear side of the trolley must have clearance from the wall or other objects of at least 20 mm
to achieve correct functionality.
Only place well cooled items in the cold cabinet.
5.
When the temperature in the trolley has come up/down to the right level, vessels containing hot or
cold food may be placed in the relevant trolley.
Bear in mind!
Use containers with lids for the best temperature retention and avoid opening them and the doors
unnecessarily. The better the areas are filled, the better the ability to maintain the correct
temperature.
6.
Conclude the heating/cooling process by deactivating the regulator (see picture above) and detaching
the power cable from the electricity socket.
