12
...
...
...
6) Remove socket head screw.
Note! Parts are under spring pressure. Hold in place while removing screw. Screw is secured with
Loctite and will be very tight. Apply Loctite to threads of screw when reassembling.
7) Remove planetary washer (retaining ring) then lift planetary wheel from shaft.
8) Reassemble in reverse order and check for proper operation. Don not re-use the retaining rings
when assembling the planetary wheels. A special tool or 15 mm socket can be used to press the
planetary washers evenly onto shaft.
9) When installing planetary gears, apply a thin coating of gear lubricant to all gear teeth.
