10
...
...
...
Note! These screws are secured with Loctite and will be very tight. Ally Loctite 243 to the screw s
threads when reinstalling.
b) Disconnect motor lead wires.
c) Remove capacitor
d) Reassemble in reverse order and check for proper operation.
Planetarygears
Note! Disconnect the electric power to the machine!
1) Remove ring gear by lifting out.
2) Remove ejector plate pin and seal washer from knife shaft.
Note! Pin is secured with Loctite and will be very tight. Apply Loctite 243 to the screw threads
when reinstalling
Ring gear
