KEWA Manual © Copyright 2016
Page: 28
28
showing the channel label and DUP replaces
SMIP.
Adding Names/Labels to Your Channels
Step
Instructions
What's Happening
1
Press the
Freq/CH
button to put the M-802 into
the
Channel Mode
if necessary.
Put the M-802 into the Channel Mode.
2
Press the "
F
" (Function button)
Enable the function mode.
3
Press the
Freq/CH
The LCD dial display will show a line of
character positions.
4
Rotate the right-hand
Channel Selector
knob
to select the first character position.
Rotating the channel selector knob selects the
character position where you want to enter a
letter or number.
5
Using the keypad, enter the desired character.
Use the "1" key for Q, Z, q, z, and space, the
"0" key for 0, and s - = / ( ) * < >
and @
6
Rotate the right-hand
Channel Selector
knob
to select the next character position.
7
Using the
keypad
, enter the next character.
8
Continue with steps 6 - 7 until you have either
completed the channel label, or all eight positions
are filled.
The maximum channel label size is eight
characters.
9
Press
ENT
when finished.
Stores the newly entered channel label into
the radio's permanent memory.
© 2009 DockSide Radio
Revised 112008
