Owner's Manual
Copyright © 2010 www.sail-kewa.com
Page 8
Engine sump well (transient)
Engine oil change
Fridge circulation
Seawater deck wash
A/c
Watermaker feed
Watermaker high pressure (Balmar and General Pump Model WM3015C)
House freshwater
Master shower drain
Using the dock water flush system
1. Run dock hose to cockpit locker and hook up to hose/fitting.
2. In engine room, open sea chest strainer thru hull.
3. Open fresh flush valve on sea chest. All other sea chest valves should be in
closed position at this time.
4. On the dock, open the water hose valve one half turn. That’s plenty of flow
for all systems.
5. Open the valve on the sea chest for the system you want to run or flush.
6. Turn on system and flush for approximately 10 minutes. You can run all
systems at once if desired.
7. When flushing is done, turn off system/s and close appropriate sea chest
valve/s. Excess water from dock hose continues to flow out through t-hull.
8. Turn off dock hose water.
9. Turn off sea chest strainer thru hull.
10. Turn off fresh flush valve on sea chest.
11. Disconnect dock hose.
