Hall Technologies November 8, 2022
Page 23 of 30
UI Element
Description
RS232 commands, the word “Standby” appears in the middle of the Guide
Screen.
•
If it’s set to 0 minute, it means this function is disabled and you cannot set the
device to standby mode.
By default, auto standby is set as 1 minute.
Apply
Click to apply setting changes.
Video
HDMI OUT RESOLUTION
UI Element
Description
Resolution
Set the output resolution for HDMI Out. Two operation methods are offered.
Auto
: select to output the maximum resolution supported by display based on
the display’s EDID. E.g. If display supports up to 4K@60Hz, the device outputs
4K@60Hz.
Resolution range list
: select a desired output resolution from the drop-down
menu to output this fixed resolution.
By default, it's set as
Auto
.
OUTPUT HDCP
UI Element
Description
Output HDCP
Set the HDCP capability for HDMI Out and HDBT Out.
Follow:
Set the output HDCP of HDMI Out to follow the HDCP capability of the
video input.
HDCP 1.4:
Set the output HDCP of HDMI Out to HDCP 1.4.
By default it is set as Follow.
